Can You Put LED Bulbs In Regular Fixtures?

LED bulbs are the latest advancement in technology and are rapidly being applied in the lighting industry. LED lighting bulbs are the best energy-saving products available today and perfectly replace traditional bulbs with outstanding advantages such as a longer lifespan (up to 50,000 hours), low power consumption. more (85% more efficient), lower maintenance costs, and higher safety. From the point of view that the price of LED lights is decreasing, LED products are becoming a lighting solution for both professional users and general users, widely used for many different lighting purposes. So can you put LED bulbs in regular fixtures? In this article, LaoKoon Design will answer your questions about this issue.

Can an LED bulb be used in any fixture?

Attachment is any fixture or accompanying application installed that does not allow proper airflow to come into contact with the LED bulb. This does not include a glass bottom or an outside plastic porch as it is suitable for use.

LED bulbs are shaped like a traditional incandescent bulb or fluorescent light. The problem is that its internal chip is similar to the one used in laptops and other electronic devices. Without a proper radiator or exhaust fan, the heat will heat up, affecting the life of the bulb. Is that why some light will tell you if it can be used in any device?

If the value for “Suitable fixture rating” is “yes”, that means the light bulb can be used for any fixture. On the contrary, if the value is “no”, the bulb is difficult to suit many devices. Using an LED bulb in a fixture when it’s not designed for that could cause the bulb to overheat, potentially damaging the bulb and fixture. Even a small addition of heat can shorten the life of your bulb and cost you the total value of your investment.

See more: Top 9 Expert Picks: Best Task Lamp For Sewing

Why are LED lights not suitable for enclosed fixtures?

A 10W LED bulb in an enclosed fixture burns with a surface temperature of about 50 degrees Celsius. A ‘fixture’ that forms any luminaire with a close-up of a close-up will typically never include a lampshade. Bulbs that come with fixed light accessories that need to be illuminated are often used in places where light is needed such as dining rooms, book rooms …

Why are LED bulbs not suitable for the attached fixtures? probably due to poor radiators. as the build-up temperature rises around the LED surface, what happens? There are 2 results: first, the light bulb will have noticeable continuous flicker; Second, the life of the LED bulb will be reduced. As a result, LED bulbs will fail faster and need to be replaced. I believe you don’t want this to happen.

Furthermore, the supplied device is not suitable for the LED bulb. it causes poor illumination, low emissivity.

Each type of LED will have its own power consumption so the dissipation temperature is also different if the attached device does not meet the heat dissipation space then that’s bad. You can refer to the website before deciding to buy it.

See more: How to buy a sun lamp for a windowless office?

What happens if you put an LED bulb in an enclosed fixture?

Currently in any family is using LED bulbs.

It is used for many different purposes mostly used in conjunction with the fixture.

An attached fixture is any fixture that is completely sealed, preventing any airflow from entering or leaving the fixture. The accompanying light is often used for outdoor or garden lighting. So the inner bulb has a reasonable color temperature and is not too glare. Usually, outdoor lights will be lit for many hours and need high brightness, so the attached fixture is made of a material that can withstand heat and water. They are great for the security, safety, and outstanding exterior lighting of your home. The housings can be styled into a variety of shapes commonly used for aesthetics and weathering.

LEDs placed in a suitably attached fixture will ensure the durability and good illumination of the lamp. Otherwise, it will cost your family economy.

Can I put LED bulbs in halogen fittings?

You should first understand a little bit about halogen bulbs. Halogen bulbs usually have an excellent CRI or color rendering index, meaning, halogen bulbs can produce light that is almost identical to sunlight. Halogen bulbs will light up immediately, so they are used in many outdoor lighting systems with motion sensors. The compact size of halogen bulbs is a great advantage for outdoor lighting products. No mercury is used in halogen bulbs. On the other hand, halogen bulbs consume a lot of electricity, so they are not considered the most eco-friendly bulbs.

Until LED chip lights became popular, halogen lamps were the best solution for outdoor lighting so far. And halogen lights are still a pretty good competitor for LEDs. Many people have chosen to switch from halogen lights to LED bulbs. But the LED lights are not always compatible with halogen accessories, which can cause some new problems for you. To ensure safety and make the most of your bulb performance you can seek the help of an electrician.

  • The brightness of the lamp is not guaranteed: It may cause dimming or flashing. This is a common problem when using an LED light without an LED driver. LEDs run on DC power, not AC. Using them in AC circuits will lead to voltage fluctuations that cause the bulb to flicker or dim erratically.
  • Transformer: A halogen transformer provides more energy than an LED would require. In some cases, you will need to replace this transformer with an LED driver to regulate the voltage. If not, there is a risk of excess energy burning the LED. This will get worse if you live in an area with frequent spikes in voltage. A good way to know if a transformer is needed? You are to check if the halogen lamps have pins or pins to connect them to the circuit. Having a latch is asking for a new transformer, without a latch is not. But anyways, installing an LED driver doesn’t do any harm so we recommend that you do.
  • Durability: LEDs when in an incompatible device can shorten the inherent lifespan.

If you want to put LEDs in a halogen device then you should consider it carefully before deciding.

Can I put a 60W LED bulb in a 40W socket?

Many people will think that it will be replaceable because they do not understand the lighting problem. When a 60W LED bulb is put into the socket 40W or What if you put a higher wattage bulb?

Using a bulb with too high power could lead to overheating of the bulb. This heat can melt the socket as well as the insulation of the wire. Once that happens, you run the risk of an arc fault, and this is something that could even lead to property fire. For example, insert a 60w or 100w bulb into an outlet with less than – 40W power, it will cause the bulb to burn quickly because the power cord cannot withstand the load. That is if you are lucky, otherwise, it can cause a fire or explosion.

A 60W LED can use as little as 8 W to operate. If your stationary unit is rated acceptable for 60 W consumption, you can rest assured to use 75W, 100W, or even 125W bulbs (all using less than 50 W) instead.

Can you use LED and incandescent bulbs in the same fixture?

What is your oldest product in technology? Is that a super old camera? Or is it an early music player? No, certainly not. Right now, take a look at your entire house and immediately pay attention to the lights. If you find them still using incandescent filaments (with tungsten filaments) then congratulations, you have a product with the oldest technology – because they were invented in 1904.

Currently, although incandescent lamps have been banned from use in many countries around the world, they still exist in this world. After being invented in 1904, many more modern lighting technologies were born. And LED lighting technology is one of them, LED lights have been developed since the 50s. In particular, with completely different technology but we still have LEDs with filament, through which we can completely imitate the classic style of incandescent lamps.

Using LED bulbs and incandescent bulbs in the same fixture will harm your LED because other bulbs increase the ambient temperature inside the fixture.

On average, LED bulbs use 84% less energy than incandescent bulbs to produce the same light efficiency. So not only do you save on electricity bills (more than 200 thousand per bulb per year at homes and more than 700 thousand per bulb per year at commercial stores). It is also important that you reduce the number of carbon emissions you release into the environment.

LED lamp life 25 times than incandescent. Incandescent bulbs have an average lifespan of 1,000 hours. Time to use at home is less than 1 year or about 2 months for commercial use. LED bulbs have a much longer lifespan with about 25,000 hours equivalent to about 23 years of home use, or 4 years of commercial use.

The combination of LEDs and other bulbs is not a good idea. For these reasons, you should buy all the LEDs in a fixture of the same brand as they will be rated for the same conditions and usage of the fixture.

Frequently asked questions

Placing an LED bulb in any device remains a few issues to be resolved. Please join us to answer a few questions below:

1. Do LED lights need a special switch?

The LED dimmer switch is also known as the Dimmer.

Dimmer is for turning on / off and adjusting the light mode of the light.

Dimmer’s principle of operation is based on the adjustment of resistance values. Change the resistance values ​​to change the amperage. Thus, the general model light intensity was adjusted.

Using a special switch for the LEDs is essential. By:

  • They allow adjusting the quality and light intensity of LEDs. Meet the needs of everyone.
  • They are used to ensure the correct voltage requirements for the lamps. At the same time, it helps to stabilize the power source and the life of the LED. The reason is that LED lights want to operate stably and long, the power source is a very important factor.
  • One note when installing a Dimmer system is that when installing a Dimmer for LED lamps, its capacity must be greater than the full capacity of the LEDs.

LED dimmer switch – Dimmer can be used for all LED lighting product line. But they are required to be high quality LED luminaires and the power supply used for that model must be a quality source

2. Can LED bulbs be used in outdoor fixtures?

In terms of initial investment costs, LEDs are now much more expensive than other products, the price measured in terms of price per lumen, due to the higher investment cost for LED technology than conventional lighting technologies. , combined with the cost of the drive circuit and the power supply … However, when considering the total cost of ownership (including the cost of energy and maintenance), LED lighting outstrips other light sources. . In December 2007, scientists at the University of Glasgow said they had found a way to make the Lamp brighter and use less energy than the existing energy-saving bulb on the market by using a method. efficiency and cost savings – using a process known as nanolithography.

In today’s life, light not only needs to be provided indoors but outdoor lighting is also very important. Thanks to the advent of LED technology, outdoor LEDs meet the needs of human use.

  • Outdoor LEDs generate less heat: Unlike traditional lamps, most of the electricity is converted into heat to produce light. LEDs with an extremely low amount of heat radiate the main source of energy turned into emitted light. Even if the lights are operated for hours, outdoor LED bulbs do not cause a feeling of heat.
  • Environmentally friendly: The outdoor LED light has an extremely long lifespan, which not only saves the user the need to change the bulb regularly but also contributes to reducing waste. In addition, the lamp is made of high-quality materials, not mercury or heavy metal, so it is extremely environmentally friendly.
  • Extremely long life: The life of the extremely high outdoor LED bulbs can be up to 50,000 hours equivalent to more than 20 years of use, 10 times higher than for conventional lamps.

Because of that, LEDs are increasingly used in outdoor equipment.

3. Can LED bulbs be used in fluorescent fixtures?

Differences between the two technologies can lead to undesirable effects.

A device called a ballast must be placed between the tube and the power supply. Because it is not possible to directly connect a fluorescent tube to the building’s power supply. There are many different types of ballasts, but in general, their purpose is to limit the current flowing into the fluorescent tube.

LED lights are another problem. Each LED tube or fixture is made up of many smaller LED elements, with electrical circuits that help the LED elements work together.

Look for “ballast compatible” LED bulbs, which means they can work with compatible ballasts already installed in your current luminaire.

This article has revolved around the problem of placing an LED bulb in regular fixtures. Hope that the above article also helps to partially answer your question. Please follow us through the following articles as well.