How To Clean An Iron Soleplate: 3 Ways To Get The Best Effect

Many people do not think it is necessary to clean the iron. However, you should be aware that a clean bottom reduces dirt from sticking to clothes and helps the device run smoothly.

Luckily, this task has never been easier, thanks to the tips on how to clean an iron soleplate in this article. Let’s scroll down to get more information.

When To Tackle The Bottom Of The Iron

When to clean your iron depends on how much you use it. With repeated use, the cleaning must take place regularly.

One emergency sign is that your clothes have become stained by the iron. Its bottom surface turns black or is filled with clothing threads.  Besides, you may notice how difficult it is to move the iron.

With just one of these things happening, it’s time to clean up the soleplate. And if you still don’t know how, do not hesitate to read the next section.

How To Clean An Iron Soleplate

Using A Mixture Of Salt And Vinegar

It is best to cut off the power and wait for the iron to cool down before doing anything.

During this time, you can prepare a 1:1 mixture of vinegar and salt. Heat it until the salt is completely dissolved.

You should put on a glove and use an old towel to dab in the solution. Then, gently wipe the bottom surface, including the steam vents.

For some stubborn stains, a sponge or scrubber is your savior. However, it is forbidden to use a metal cleaner unless you want to damage the soleplate.

Using Baking Soda

The standard recipe for this cleaning solution is one teaspoon of water and two tablespoons of baking soda. Mix well so that the mixture becomes gelatinous.

Then, it would help if you used a spoon to spread the paste evenly over the soleplate. Wait 2-5 minutes, then wipe off with a damp cloth. It does not matter when you scrub. You can repeat these actions until the dirt comes out.

It is highly recommended to use a cotton swab to remove the residue in the vents. Finally, turn the iron upside down to remove the water.

Using Other Substances For Special Cases

In some cases, it may be a bit more difficult to handle particular stains. Refer to the tips below to save your devices as quickly as possible

Firstly, Teflon-coated soleplates, which is the best iron for quilters, require a softer cleaning mixture than the two formulas above. One suggestion for you is to use toothpaste and do the cleaning procedures like baking soda.

In case your equipment has sticky stains, you can treat it immediately with a candle. Turn on the iron at full temperature and press firmly on the candle. As long as it is melted, disconnect the power. The glue will thicken and absorb all the dirt.

Lastly, we will come to the most complicated situation: a burned soleplate. To remove the burning outside, you should come up with a knife. Remember to scrape carefully and gently so as not to damage the surface or your hands. Then you need to use a metal polish, which is found easily in supermarkets. Spray it and wipe with a towel until you see a shiny soleplate.

See more of the best quilting tools at Website:


This article has just shown you how to clean an iron soleplate. As you can see, it is not a difficult or time-consuming task, but certainly brings you unexpected benefits. That is why you should keep in mind to do cleaning regularly.

Further reading:

What To Expect In A Baby Crib?

A crib is like a big place to put your newborn baby in, yet the safest place for him/her to sleep. For the first few months, many parents choose a bassinet or a cradle, but buying a crib will be more cost-effective as it can act as a lifelong bed for your baby.

If you are wondering what to expect in the safest crib, we have listed some basic criteria for choosing the best one.

1. Basic is best

The safest crib has simple lines with no finials. It is to prevent baby clothing from getting caught in those detail work.

2. Teething rails

Teething rails should be smooth when covering the top of the side rails. It is mostly covered with plastic coverings to protect the crib and your baby’s gums and teeth as he/she will love to gnaw on the crib’s rails.

The teething rails should not crack or break.

3. Portability

A portable crib is just similar to a regular crib but usually smaller. You should know that it won’t as long as a full-size folding crib.

People opt for portable cribs as they live in a small apartment or want to take something along to their grandparents’. Keep in mind that the mattress and sheets specifically for this type of crib should be bought at the same time you buy the crib.

4. Single drop gates

A single drop gate allows you to lower a small portion of the crib’s site (not the entire site, though). This feature ensures safety, prevents the hazard of a full-drop one, and makes it easier to take the baby out.

5. Wheels

Cribs can come with wheels made of plastic or metal. These caster wheels swivel and make the crib easy to be moved around.

If you prefer a crib without wheels, keep that in mind despite your plan to move the crib into another room when your baby is 6 months old. You will soon acknowledge that cribs are often too wide to go through a standard bedroom door. Only when disassembled, the crib can be ready for the move.

6. Construction materials

Mostly, cribs are made of wood. Other types of materials are available as well. You can choose a wide range of painted finishes from dark to light, for a variety of colors (grey, cherry, white, washed white, pastel green, blue, pink, yellow, etc). Unless there are serious defects like splintering or peeling paint, any little roughness found on the coated finish will not be a problem.

Can You Put LED Bulbs In Regular Fixtures?

LED bulbs are the latest advancement in technology and are rapidly being applied in the lighting industry. LED lighting bulbs are the best energy-saving products available today and perfectly replace traditional bulbs with outstanding advantages such as a longer lifespan (up to 50,000 hours), low power consumption. more (85% more efficient), lower maintenance costs, and higher safety. From the point of view that the price of LED lights is decreasing, LED products are becoming a lighting solution for both professional users and general users, widely used for many different lighting purposes. So can you put LED bulbs in regular fixtures? In this article, LaoKoon Design will answer your questions about this issue.

Can an LED bulb be used in any fixture?

Attachment is any fixture or accompanying application installed that does not allow proper airflow to come into contact with the LED bulb. This does not include a glass bottom or an outside plastic porch as it is suitable for use.

LED bulbs are shaped like a traditional incandescent bulb or fluorescent light. The problem is that its internal chip is similar to the one used in laptops and other electronic devices. Without a proper radiator or exhaust fan, the heat will heat up, affecting the life of the bulb. Is that why some light will tell you if it can be used in any device?

If the value for “Suitable fixture rating” is “yes”, that means the light bulb can be used for any fixture. On the contrary, if the value is “no”, the bulb is difficult to suit many devices. Using an LED bulb in a fixture when it’s not designed for that could cause the bulb to overheat, potentially damaging the bulb and fixture. Even a small addition of heat can shorten the life of your bulb and cost you the total value of your investment.

See more: Top 9 Expert Picks: Best Task Lamp For Sewing

Why are LED lights not suitable for enclosed fixtures?

A 10W LED bulb in an enclosed fixture burns with a surface temperature of about 50 degrees Celsius. A ‘fixture’ that forms any luminaire with a close-up of a close-up will typically never include a lampshade. Bulbs that come with fixed light accessories that need to be illuminated are often used in places where light is needed such as dining rooms, book rooms …

Why are LED bulbs not suitable for the attached fixtures? probably due to poor radiators. as the build-up temperature rises around the LED surface, what happens? There are 2 results: first, the light bulb will have noticeable continuous flicker; Second, the life of the LED bulb will be reduced. As a result, LED bulbs will fail faster and need to be replaced. I believe you don’t want this to happen.

Furthermore, the supplied device is not suitable for the LED bulb. it causes poor illumination, low emissivity.

Each type of LED will have its own power consumption so the dissipation temperature is also different if the attached device does not meet the heat dissipation space then that’s bad. You can refer to the website before deciding to buy it.

See more: How to buy a sun lamp for a windowless office?

What happens if you put an LED bulb in an enclosed fixture?

Currently in any family is using LED bulbs.

It is used for many different purposes mostly used in conjunction with the fixture.

An attached fixture is any fixture that is completely sealed, preventing any airflow from entering or leaving the fixture. The accompanying light is often used for outdoor or garden lighting. So the inner bulb has a reasonable color temperature and is not too glare. Usually, outdoor lights will be lit for many hours and need high brightness, so the attached fixture is made of a material that can withstand heat and water. They are great for the security, safety, and outstanding exterior lighting of your home. The housings can be styled into a variety of shapes commonly used for aesthetics and weathering.

LEDs placed in a suitably attached fixture will ensure the durability and good illumination of the lamp. Otherwise, it will cost your family economy.

Can I put LED bulbs in halogen fittings?

You should first understand a little bit about halogen bulbs. Halogen bulbs usually have an excellent CRI or color rendering index, meaning, halogen bulbs can produce light that is almost identical to sunlight. Halogen bulbs will light up immediately, so they are used in many outdoor lighting systems with motion sensors. The compact size of halogen bulbs is a great advantage for outdoor lighting products. No mercury is used in halogen bulbs. On the other hand, halogen bulbs consume a lot of electricity, so they are not considered the most eco-friendly bulbs.

Until LED chip lights became popular, halogen lamps were the best solution for outdoor lighting so far. And halogen lights are still a pretty good competitor for LEDs. Many people have chosen to switch from halogen lights to LED bulbs. But the LED lights are not always compatible with halogen accessories, which can cause some new problems for you. To ensure safety and make the most of your bulb performance you can seek the help of an electrician.

  • The brightness of the lamp is not guaranteed: It may cause dimming or flashing. This is a common problem when using an LED light without an LED driver. LEDs run on DC power, not AC. Using them in AC circuits will lead to voltage fluctuations that cause the bulb to flicker or dim erratically.
  • Transformer: A halogen transformer provides more energy than an LED would require. In some cases, you will need to replace this transformer with an LED driver to regulate the voltage. If not, there is a risk of excess energy burning the LED. This will get worse if you live in an area with frequent spikes in voltage. A good way to know if a transformer is needed? You are to check if the halogen lamps have pins or pins to connect them to the circuit. Having a latch is asking for a new transformer, without a latch is not. But anyways, installing an LED driver doesn’t do any harm so we recommend that you do.
  • Durability: LEDs when in an incompatible device can shorten the inherent lifespan.

If you want to put LEDs in a halogen device then you should consider it carefully before deciding.

Can I put a 60W LED bulb in a 40W socket?

Many people will think that it will be replaceable because they do not understand the lighting problem. When a 60W LED bulb is put into the socket 40W or What if you put a higher wattage bulb?

Using a bulb with too high power could lead to overheating of the bulb. This heat can melt the socket as well as the insulation of the wire. Once that happens, you run the risk of an arc fault, and this is something that could even lead to property fire. For example, insert a 60w or 100w bulb into an outlet with less than – 40W power, it will cause the bulb to burn quickly because the power cord cannot withstand the load. That is if you are lucky, otherwise, it can cause a fire or explosion.

A 60W LED can use as little as 8 W to operate. If your stationary unit is rated acceptable for 60 W consumption, you can rest assured to use 75W, 100W, or even 125W bulbs (all using less than 50 W) instead.

Can you use LED and incandescent bulbs in the same fixture?

What is your oldest product in technology? Is that a super old camera? Or is it an early music player? No, certainly not. Right now, take a look at your entire house and immediately pay attention to the lights. If you find them still using incandescent filaments (with tungsten filaments) then congratulations, you have a product with the oldest technology – because they were invented in 1904.

Currently, although incandescent lamps have been banned from use in many countries around the world, they still exist in this world. After being invented in 1904, many more modern lighting technologies were born. And LED lighting technology is one of them, LED lights have been developed since the 50s. In particular, with completely different technology but we still have LEDs with filament, through which we can completely imitate the classic style of incandescent lamps.

Using LED bulbs and incandescent bulbs in the same fixture will harm your LED because other bulbs increase the ambient temperature inside the fixture.

On average, LED bulbs use 84% less energy than incandescent bulbs to produce the same light efficiency. So not only do you save on electricity bills (more than 200 thousand per bulb per year at homes and more than 700 thousand per bulb per year at commercial stores). It is also important that you reduce the number of carbon emissions you release into the environment.

LED lamp life 25 times than incandescent. Incandescent bulbs have an average lifespan of 1,000 hours. Time to use at home is less than 1 year or about 2 months for commercial use. LED bulbs have a much longer lifespan with about 25,000 hours equivalent to about 23 years of home use, or 4 years of commercial use.

The combination of LEDs and other bulbs is not a good idea. For these reasons, you should buy all the LEDs in a fixture of the same brand as they will be rated for the same conditions and usage of the fixture.

Frequently asked questions

Placing an LED bulb in any device remains a few issues to be resolved. Please join us to answer a few questions below:

1. Do LED lights need a special switch?

The LED dimmer switch is also known as the Dimmer.

Dimmer is for turning on / off and adjusting the light mode of the light.

Dimmer’s principle of operation is based on the adjustment of resistance values. Change the resistance values ​​to change the amperage. Thus, the general model light intensity was adjusted.

Using a special switch for the LEDs is essential. By:

  • They allow adjusting the quality and light intensity of LEDs. Meet the needs of everyone.
  • They are used to ensure the correct voltage requirements for the lamps. At the same time, it helps to stabilize the power source and the life of the LED. The reason is that LED lights want to operate stably and long, the power source is a very important factor.
  • One note when installing a Dimmer system is that when installing a Dimmer for LED lamps, its capacity must be greater than the full capacity of the LEDs.

LED dimmer switch – Dimmer can be used for all LED lighting product line. But they are required to be high quality LED luminaires and the power supply used for that model must be a quality source

2. Can LED bulbs be used in outdoor fixtures?

In terms of initial investment costs, LEDs are now much more expensive than other products, the price measured in terms of price per lumen, due to the higher investment cost for LED technology than conventional lighting technologies. , combined with the cost of the drive circuit and the power supply … However, when considering the total cost of ownership (including the cost of energy and maintenance), LED lighting outstrips other light sources. . In December 2007, scientists at the University of Glasgow said they had found a way to make the Lamp brighter and use less energy than the existing energy-saving bulb on the market by using a method. efficiency and cost savings – using a process known as nanolithography.

In today’s life, light not only needs to be provided indoors but outdoor lighting is also very important. Thanks to the advent of LED technology, outdoor LEDs meet the needs of human use.

  • Outdoor LEDs generate less heat: Unlike traditional lamps, most of the electricity is converted into heat to produce light. LEDs with an extremely low amount of heat radiate the main source of energy turned into emitted light. Even if the lights are operated for hours, outdoor LED bulbs do not cause a feeling of heat.
  • Environmentally friendly: The outdoor LED light has an extremely long lifespan, which not only saves the user the need to change the bulb regularly but also contributes to reducing waste. In addition, the lamp is made of high-quality materials, not mercury or heavy metal, so it is extremely environmentally friendly.
  • Extremely long life: The life of the extremely high outdoor LED bulbs can be up to 50,000 hours equivalent to more than 20 years of use, 10 times higher than for conventional lamps.

Because of that, LEDs are increasingly used in outdoor equipment.

3. Can LED bulbs be used in fluorescent fixtures?

Differences between the two technologies can lead to undesirable effects.

A device called a ballast must be placed between the tube and the power supply. Because it is not possible to directly connect a fluorescent tube to the building’s power supply. There are many different types of ballasts, but in general, their purpose is to limit the current flowing into the fluorescent tube.

LED lights are another problem. Each LED tube or fixture is made up of many smaller LED elements, with electrical circuits that help the LED elements work together.

Look for “ballast compatible” LED bulbs, which means they can work with compatible ballasts already installed in your current luminaire.

This article has revolved around the problem of placing an LED bulb in regular fixtures. Hope that the above article also helps to partially answer your question. Please follow us through the following articles as well.

Top 5 Best Parkour Shoes You Should Know About

Parkour is not only a dangerous sport (climbing, running, swinging, jumping, vaulting…) but also a perfect choice for those who are fervent about discovering their body.

One of the most important conditions to keep up with these training activities is, you own the exact shoes. Professional Parkour shoes will deliver vital tools to improve your technique while keeping you safe.

Related post:



TakeFlight Stealth Ultra Parkour Shoes

If you are trying to find shoes that provide flexibility, comfort, and durability altogether, look nowhere except Take Flight parkour shoes.

BRAND Take Flight MODEL Steal Ultra 2.0




CATEGORY Parkour Shoes TYPE Unisex

TakeFlight shoes are well designed and provide almost everything traceur needs. From longevity to breathability, these shoes have a range of benefits to offer. They are crafted to help you get the clasp you need while tackling hard and uneven surfaces. It assists in providing a smooth and stable parkour experience, thus trainers can confidently drift on various surfaces and still avoid any risk of injury.

While running, the Take Flight shoes provide control, and thus, you can easily navigate. The shoe offers a firm grip that allows you to jump or run without any hesitation or fear.

Double Sole (Adjustable Cushioning)

Light Weight

Designed Perfectly to minute details

Expert Contributors

Use the Europen Scale

Read more: A space for parkour lovers

Onitsuka Tiger Ultimate 81 Running Shoes

Onitsuka Tiger brand is actually one of the oldest in Japan and is well-known for its parkour shoes. Although it may not be as big as some of the other sporting giants out there, it has definitely made a mark by revolutionizing sports with technology-driven products. The Onitsuka Tiger Ultimate 81 Running Shoes have all the characteristics needed to make the sport fun and comfortable. As we all know, comfort and durability are everything in the world of sports today.

BRAND Onitsuka Tiger MODEL Ultimate 81-U




CATEGORY Parkour Shoes TYPE Unisex

The Onitsuka Tiger Ultimate 81 also provides a superior grip to match the feel it allows. Many users report the grip actually improves over time as you begin to wear them in. As you do so, the shoe is also said to begin conforming to the outside of your foot, providing a snug fit unique to you.

Excellent Rubber Outsole For Great Gripping

Cushioned insole for added comfort and support

Available in 10 Different Colours


May Not Be Durable. The microfiber might not be as sturdy as other materials

Merrell Vapor Glove 3 Shoes

The Merrell Vapor Glove 3 is a zero-drop, nearly-barefoot road running shoe designed to deliver a full ground contact experience for daily training.

Design: As mentioned previously these shoes’ design could be a thing of beauty for parkour athletes. These shoes are a number of the closest to a barefoot feeling that I’ve encountered. With an integrated microfiber sole, you’ve got lots of comfort and cushion, while still supplying you with a sleek and minimalistic design. If you’re trying to find a light-weight and barefoot feel while training then this shoe is for you!

Grip: Extremely minimalistic but inherited the original design of Merrell for all of their shoes for trail running, these shoes even have an incredible amount of grid on both wet and dry surfaces.

EvolvCruzer Approach Shoes

EvolvCruzer Approach Shoes make a great transformation from a mountaineering brand into a parkour base on its great features: lightweight – about 1 pound and grip sole.

That shoe also was designed to be used without socks and it is extremely light as mentioned above and pretty thin. Their medium durability might be a minus point – about 1 year if you seem to practice parkour every day!

Feather light

Great for carrying on long multi-pitch routes

Smears well, great value

Poor durability

Very little foot support

Vibram Men’s Kso Trail shoes

Vibram is a new-born brand among some famous brands. However, this company made a nice shot as they focus on athletes and promote their product via this channel.

Easy to understand why Vibram Men’s KSO Trail shoes deliver tons of high-quality features:

– Comfortable fitting like a glove on your feet.

– Rubber sole for grip, a perfect match for both rocky and wet surface.

– Tech-applied materials: qualify rubber combines with three fabrics – Polyamide / Polyester / Hypalon.

– Smart design with separate slots for the toe.

Extra Guideline

Above we provide you Top 5 best parkour shoes ranked in 2020. And here are some more direct opinions of parkour shoe owners. Besides these main attractive features, I think reviews will help you to make the best decision and invest in the appropriate brand. The good shoes not only support you to develop your skills in parkour but also protect you from lots of unwanted injuries.

For any parkour activities, a grippy shoe is a high factor of success. As it will prevent slipping, provide adhesion on any kind of surfaces. The question is, which material can ensure this feature? Experts will tell you, it’s rubber. Rubber is the perfect material to produce parkour shoe soles. If the manufacturer applied capable technologies, you may get the real touch! That’s why you need to select a pair of shoes with a high-quality rubber sole.

Last but not least – the size of the shoes. It’s not fun if shoes drop out when making a move or if your feet hurt by your own tiny shoes.

What Is The Best Etiquette For Beginners In Golf?

Etiquette For Beginners In Golf

Golf is a sport that is highly appreciated for its delicacy and politeness. To get on well with this “luxurious” game, besides golfing techniques, it is essential to know the golf’s etiquette. So, what Is The Best Etiquette For Beginners In Golf? 

Do you find it hard to get the answer? Don’t worry! We are here to help. Let’s discover!

What is the best etiquette for beginners in golf?

The Best Etiquette Before The Game


For beginners, you may need a few canes irons (7, 8, 9), a driver, a Woods or Hybrids, and also a Putter and a technical cane (Wedge). In addition, for golf balls, you should buy ones at a reasonable price to avoid losing the ball while practicing Golf.


It would be best if you go for comfortable clothing. It can be a Collared polo shirt, full-length trousers with belt loops, Knee-length shorts, or skirt and dress for ladies, Soft spike golf shoes and Short ankle-height white socks.

You can wear golf shoes or sneakers. Besides, a golf glove, a cap, and sunglasses are good optional accessories.

The Best Etiquette During The Game

Keep silent

Golf is a genuinely tranquil game. It would be best if you were as peaceful as possible during somebody’s golf shot or while others are setting up to hit their ball (incorporates the training swings). This shows respect for yourself and others. Keep in mind that “Silent is Gold!”

Be early to your tee time

You had better arrive at the course before 20-30 minutes (your tee time) so that you can check-in, prepare necessary things and warm up.

See more: Best golf drivers under $200 

Golf cart

When you go toward the green on some random gap, consider where the following hole and park your handcart on that side of the green if possible. By that way, when you fall off the green, your cart is available, and you don’t waste your time traversing the green.

Ready for your turn

Line up your putt as others are putting but don’t distract others, and once their ball is rolling, get your show on the road down. Try not to let your friends wait for you since it makes them unpleasant and influences the fun moment. Be proactive and be consistently prepared for your turn.

No phone

What will happen if you disturb others with phone ringing or conversations on the phone? And even worse, you may focus on your phone without noticing your turn. So, better yet, don’t bother with your phone for full pleasure.

Let it “relax” in a certain corner such as your cart, or your pocket with the ringer off.

featured-Etiquette For Beginners In Golf

Control your mood

We know that the game is completely difficult. So, you don’t need to explain yourself to your partner about your play, no matter if it’s good or bad. Keep your head up and a grin all over. Take a little pride when you hit a superb shot, and ignore the terrible.

Don’t let anger or bad mood be your “boss” under any circumstance. Just enjoy yourself!

The Best Etiquette After The Round 

Shaking hands and saying thanks are golfers’ habit of expressing their gratitude to the player or the joy after the round. Even if you are in a bad mood, you should do it because it is the formal courtesy and a skillful refusal to stay for a drink.

Besides, it’s frequently customary to stay and have a beverage with the guys you play with after the round.

The Bottom Line

In conclusion, each game has its particular rules, and Golf is a specific example. What Is The Best Etiquette For Beginners In Golf? You will become a good starter if you comprehend it and practice it well

We hope this article has provided you with useful information to help you have a great experience without being confused with this exciting sport. Good luck to you on your golf journey!

Further reading:

60-gallon Air Compressor Tank And Its Uses

air compressor

Air compressors are the most common ones we can find both indoors and in professional environments; its uses are limitless and anyone can find help with their own activities.

Inflatable tire for bicycle, motorbike, automobile, water game, air blowing to clean tool, working environment, as well as connecting power tools.

Unscrew and screw nuts, shoot nails, paint, chisels, sand, and more.

A compressor is essential and you’ll find our type of air compressor. The site will be updated every vs. Requirements for both price and model.

Variable intake and distribution, adjustable pressure for different uses, drive with or without belts, single-phase, three-phase, with levels different sounds….

How to choose an air compressor

Although there are compressors of different sizes and different types of fuel systems on the market, in terms of operating technology, there are only two main types of compressors: piston compressors and compressors. screw gas.

A compressor is a machine that increases the pressure of a gas by reducing its volume. Hence, an air compressor is a specific type of compressor.

These types of machines are divided into two main groups: active displacement compressors and centrifugal compressors, also known as dynamic compressors. Air compressors are used in all manufacturing processes and industrial applications that require compressed air.

Which 60-gallon air compressor should I choose?

Instead, the machine’s cooling will depend on its ventilation system, so this is another aspect not to be missed. Another important selection criterion is the duty cycle of the compressor.

This number, usually in the specifications provided by the manufacturer, indicates the compressor can operate for a period of one hour.

For example, a compressor has a duty cycle of 30%, it will only be able to run for 18 minutes per hour and will need to be cooled for the remaining 42 minutes. Some portable pneumatic tools can only be used with the help of air compressors:

. Cordless ratchet

. Choose hammer, nail

. Screwdrivers, pneumatic hammer, pneumatic gun

. Painters, and blowers, etc.

Air compressors, whether stationary or transportable, can also be used in industry or agriculture, for example:

The use of pneumatic tools on the production line

. Expulsion from production mold.

. Pneumatic supply of pneumatic cylinder

. Sandblasting to finish metal parts

. Supplying compressed air for machines used in milk

. Ventilation systems in greenhouses, etc.

To choose an air compressor that suits your needs, you must first determine how often you will use it and determine your compressed air requirements.

What is the best 60-gallon air compressor?

The capacity of the compressor depends on the desired airflow and the outlet pressure. Compressors with a high rated capacity but low flow rate are designed for infrequent use and their cooling requires long pauses.

The compressor usually has a built-in compressed air tank, allowing you to start the engine according to your needs. This jar should be calibrated correctly so as not to cause constant engine stress.

Furthermore, some compressors have a vertical storage tank, allowing less space on the machine. This feature can be very helpful if you have limited space.

To properly set the size of your compressor, you must first set the maximum pressure you will need. This pressure will depend on industrial or agricultural equipment or the pneumatic circuit the compressor is used to power.

Pressure can be expressed in pounds per square inch (psi), in bars, or in pascals (Pa).

Maximum capacity is another important criterion to choose from.  60-gallon air compressor

Flow rate is the amount of air a compressor can supply to power multiple devices at the same time. This value can be expressed in cubic feet per minute (cfm), liters per second (l / s), or cubic meter per hour (m3 / h).

To avoid the compressor that you are about to buy, but also encounter operational failures, we recommend choosing a model that offers a 30% margin of safety over your needs. estimate.

What type of compressor to choose?

Most compressors are volumetric machines, which means that compression is accomplished by reducing the occupied volume of air. Most volume compressors are equipped with electric motors.


Another factor to consider is the portability of the device. Before buying a compressor, you will have to ask yourself whether it is necessary to transport it from place to place or vice versa if it will be permanently installed in a specific place.

See Also:


. How to Set Up Your 60 Gallon Air Compressor

How Do You Seal Outdoor Wood? – A Useful Woodworking Guide

How to seal wood

Wood is a popular building material for many amazing items of furniture and trims works. Unfortunately, wood is easily exposed to harmful elements such as moisture and high humidity.

By sealing the wood, we can protect them from these negative impacts. But, how do you seal outdoor wood? Keep reading our today article to know the answer!

What you need for sealing outdoor wood

  • Sealer
  • Sandpaper (tough and fine)
  • Irrigation syringe
  • Paper bag
  • Vacuum
  • Epoxy (for filling cracks and mumbles of the wood)
  • Clean cloth
  • Clean paint brushes
  • Mask or respirator (for preventing dusks)
  • Latex gloves

How do you seal outdoor wood – A Step-by-Step Guide

Step 1: Prepare the surface of the wood:

How do you seal outdoor wood? Firstly, you need to prepare the surface of the wood.

Ensure the surface of the wood is dust-free and clean by sanding it down.

First, starting with rough sandpaper (80-grit) to get rid of remnants from previous works and any imperfections on the wood.

More: Good quality wood sealer for outdoor furniture

Your wood may carry the cracks and mumbles, so you should fill these with wood filler like epoxy, and use a putty knife to spread the epoxy, or simply coating the entire surface.

For the deepest cracks, use an irrigation syringe to force epoxy into them. Then, leave the wood dry before sealing.

When the epoxy is completely dry, use finer sandpaper to ensure a smooth finishing touch for the surface, then wipe it with a clean cloth to remove all the sanding residue.

Step 2: Apply the first coat:

The next step for sealing outdoor wood, absolutely, is to apply the sealer.

Make sure that your hands are clean and dry by wearing the latex gloves. Now simply brush sealer on the wood with a simple clean paintbrush.

The first coat will begin to dry fairly quickly, so avoid overlapping the places you have applied sealer, and only work your way methodically from one edge to the other.

Step 3: Start sanding

Before applying the second coat, you should check the surface of the wood carefully as you may not want to recoat if it seems tacky. One way to check it is to press a cotton ball upon the surface, if nothing sticks to the ball, then you are ready to go.

But before that, many types of sealants need a second sanding to ensure the next coat sticks better.

This should be done with 400-grit sandpaper, enough to smooth things out without damaging the sealing. And if your paper is gumming up, it’s better to wait for it to dry completely.

When you have done sanding, remove dust with a vacuum and then wipe  the surface again with water or mineral spirits to prepare it for the second coat.

Step 4: Apply more coats

The second coat will not absorb thoroughly like the first one, so put it on a bit thinner, then repeat the process of drying, sanding and wiping and move to the third coat.

For the third coat, wipe straightly from side to side, don’t go back over an area once you’ve left it. If you see a streak in an area you’ve already covered, don’t worry much about it as it will almost disappear when the coat is completely dry.

After the third coat, lightly sand the wood with 600-grit sandpaper, then apply on it the thinnest coat as possible, but still keep the surface wet evenly.

It is recommended that three regular coats and one super thin coat are adequate. Applying more than that number isn’t good. If you apply ten coats, they will not be long-lasting as four applied coats.

Now, do the final buffing with a brown paper bag, which is equivalent to 1500-grit, then leave the wood for curing.


Step 5: Cure

Now you’ve done the hardest part. It’s time to leave the wood to cure for about three days before using it. During the curing process, don’t place any heavy things on the surface, especially plastic, otherwise, it may stick to your finishing.


How do you seal outdoor wood? Now, your problem has been solved. After getting used to our tutorial, it’s important to properly do the sealing step-by-step. Regularly recoat your wood to extend its life and keep it a long-lasting beauty.

Start sealing your outdoor wood like a pro right now! Stay tuned and see you in another tutorial.

Wholesale Fashion Clothing In Wólka Kosowska For Dropshippers

fashion store

Women love to shop for clothes. It is not as via a tunnel the thrill of shopping as a moment has come about just wanting to watch out for your best. Appearance in this competitive world is given much priority. Even for the self-employed or unemployed for that matter, we all want to look their best and skill to express themselves through their style and fashion.

Wólka Kosowska is a village in the administrative district of Gmina Lesznowola, within Piaseczno County, Masovian Voivodeship, in east-central Poland. It lies approximately 8 kilometers south-west of Lesznowola, 12 km west of Piaseczno, and 21 km south-west of Warsaw. Wólka Kosowska has many Asian businesses. If you are looking for an online clothing wholesale website at Wólka Kosowska, contact Wolkafashion immediately. Wolka Fashion is one of the most reputable and best priced online clothing wholesalers Hurtownia odzieży online w Wólka Kosowska in Poland.

The web includes businesses which deal in wholesale clothing. Such dealers might be located through web pages created for that specific need. Larger places will extend their listings beyond clothes to various kinds of things. If you are seeking the business, it is best to consider these resources.

Know to decide the financial clothing that you are going to buy in wholesale. If you see certain designer pieces that you’re interested in, then use them your sell.

When you purchase wholesale clothing for your clothes it’s not necessary to buy hurriedly without considering some factors. Entirely efficient in buying a person to apply some suggestions on shopping for the items for your business.

Stop that immediately, 100 years of experience to accomplish that, but it can be not easy too. I would suggest you see the inspiring piece entitled “The MagicNike Swoosh Logo merely Do It” to grasp the idea. The trade wherein the investors take out cash and sit there and wait will provide you nowhere. It is every bit like devoid of true aestheticism of sexy apparel, ought to be going nowhere in your pursuit of the sexiest time ever experience.

You can start as a small online or local clothing store. You just need to locate a wholesale clothing supplier to whom you will obtain your possessions. ClothingIndustry is becoming the most popular in today. It is typically profitable once you learn how in order to create rounds within it. Purchasing apparel by wholesale can assist you in putting your own business and develop your tapering point small business venture. So that luck would have it, you wholesale companies that can a person stylish clothing on a consignment agreement.

Develop your business proposal. This is your blueprint to follow and help you not only answer important doubts about what these types of sell, but also the steps it is advisable to take develop the associated with having an effective business. In addition, if you are seeking a small business load to assist finance any kind of have a lot of ventures, banks will need to visit your investment business plan.

Check the minimums. Often wholesalers will necessitate that procure no fewer items in order for you to definitely get their clothing flip. You may have to purchase more than 100 assured products, or it is not acquiring a minimum at all, but every distributor is many kinds of. This is genuine that No minimum= no issue.

See more online wholesale clothing products here:

These are just the 3 guidelines that support you focus on your wholesale fashion clothing business. Don’t make things difficult in order for there are just a lot of easy ways for launching the sort of business.

How To Update The Ceiling By Painting With Paint Sprayer

ceiling painting

If you have decided to use paint for finishing walls and ceilings it’s one of the best ways to get the good-looking and long-lived surfaces. But only with a paint sprayer, you will enjoy high quality painted ceiling with a minimum of time, money and nerves spent. How to prepare the ceiling? What paint to choose? How to paint the ceiling with a paint sprayer? Find the answers below.

Choose the right tools

Painting quality depends on the preparatory work quality, properly selected paint and tools, and the master’s skills.

You will need:

Safety notes:

In the room where the ceiling will be painted, you must turn off the devices with an open flame and provide good ventilation by opening windows and doors.

Preparation for painting

Painting surface preparation

To prepare the ceiling for painting you are recommended to go through four steps.

Step 1. Remove the old paint layers. If the ceiling was whitewashed, you need to wash lime carefully with suds. Water-based paint must be moistened. Make a draft in the room by opening windows and doors. Remove the paint from the entire surface using a spatula.

Step 2. Then apply a primer aimed for deep penetration. Perhaps you will need to do it twice. Each layer will get dry in approximately 4 hours.

Step 3. Fill gaps using a special mesh. Level the surface with a thin layer of the final putty. Let it dry.

Pay attention! Puttying of the ceiling is necessary. Not removed obtrusive areas and hollows will occur on the surface after painting.

Step 4. The ground of the puttied flat surface.

Take care of yourself

While painting with a paint sprayer microparticles of the paint fill the air and can accumulate on the mucous membranes of the eyes, lungs, nose, and throat, trachea. If you do not use protection, your health is in danger. All parts of the body must be covered with clothing, gauze, or a respirator and goggles.

All the furniture should be carried out or covered with plastic film as well as the floor, windows, and doors in order to protect them from paint drops. Disable chandeliers and lamps and remove them. If you are not going to paint the walls, they also need to be covered with polyethylene film.

Is the paint ready?

It is important to know how to paint the ceiling in the premises of different functional purpose with a paint sprayer. The choice of paint is also influenced by your personal preferences and financial capabilities.

Living rooms. Ideal paint for the bedroom, living room and children room ceilings will be matt dispersion or emulsion paint. These paints are able to hide the surface defects, preserving the original appearance for a long time. Applying water-based paint with a paint sprayer is rather quick and easy work. The result is excellent.

Kitchen and bathroom. For these rooms, you will need paint with excellent resistance to aggressive environments. Emulsion paints, acrylic-vinyl-based, or acrylic-based paints perfectly resist dirt and water. These paints don’t have a strong smell, and they dry quickly.

Also, you can use latex acrylic-based paints but you will need a professional paint sprayer so read instructions for your device carefully in order to know which paints are permitted to use in it.

Silicate paints are perfect for the mineral plaster, concrete, brick. This type of paint is characterized by good moisture resistance, elasticity, anti-fungal properties. Silicate paint is a good choice for the bathroom ceiling.

Silicone paint combines the best qualities of all the other paints. Using this kind of paint, you can disguise cracks up to 2 mm wide. This paint has a maximum performance of microorganisms, fungi, and moisture resistance.

Fill the paint sprayer tank with prepared paint to make a test spray. Properly prepared paint falls on surfaces evenly and does not clog the tool’s nozzle.

Steady, ready, go!

The ceiling is not the most convenient place to work with paint. Mechanical paint sprayers can be used for painting the walls when you are standing firmly on the floor. Paint sprayer of the professional and semi-professional line is suitable for ceiling painting.

The main requirement while painting is even painted application. Select the proper distance from the sprayer to the ceiling (10-60 cm). It is necessary to keep this distance during the process.

The tip has to be directed perpendicular to the painted surface.

Pay attention! Don’t stay for long in one place otherwise, you will get a thick paint layer and it will start to flow. Hasty movements will cause uneven painting.

Start the work near the walls and spray paint with successive movements and moving parallel to the other wall. When you have finished painting one lane, proceed to the next. Before applying the next layer, let the painted surface get dry.

After finishing your paint sprayer has to be washed in solvent liquid. The device should be clean because paint residues can cause the sprayer damage.

Now you can enjoy the updated and fresh look of your interior.

Further reading

Best DIY Ideas This Summer For Kids You Should Know About

diy socks for your baby

Summer is still outside, and the Coronavirus crisis seems is not decreasing. In this article, team will give you five best DIY ideas for parents to create a fun time at home for their kids.

1 – DIY Story Stones 

This idea is perfect for kids who like drawing. Instead of drawing on paper, let them try to be creative and make up for different shapes of stones.

This DIY idea is literally for children from 4 years old. Parents can give their kids some ideas like A family of penguins, a garden of flowers with bees, and butterflies, or an ocean with variety fishes… Do not worry; the kids know what they should draw on stones. After finishing, let put these arts on windows, tables at home, or kids’ place, or in the garden, showing parents appreciation for their work. So next time, they will more excited about other projects between them and their parents.

2 – DIY Treasure Hunt 

Kids will love this idea, it reminds them about Easter egg hunting. But instead of eggs, summer treasure is more excited. It is just revealed if they can find where the wealth is.

Parents can create a simple map by name everything in the house or backyard as a part of an island. Give kids instruction and let them play a role like pirates or knights. Parents can create some challenges on the way to help their children do some physical exercises or brainstorming. This DIY idea is perfect for kids from seven to ten years old.

3 – DIY baby swings 

The DIY baby swings are not only ideal for the family has a small space but also for a house that has a backyard garden. It is a ton of different materials for a DIY baby swing. It also depends on the size and ages of their kids.

In our opinion, kids under four years old should have a swing with fabric and ropes; even if it is an inhouse baby swing or a baby swing for outdoor, please make sure the hooks and material are strong enough to hold their baby.

For kids over six or seven years old, a baby swing made by tires and ropes such as a DIY tree baby swing can increase their joy. Unfortunately, children are not helpful in this DIY project.

4 – DIY Colorful Fans 

Summer heat complaints will go away with these DIY colorful Fans. All we need here is sticks, paper and watercolors. For the sticks, we can use BBQ Sticks or Popsicle Sticks, which are around the corner. Drill a hole to keep them stick together in the bottom. Parents should let their kids color sticks in a different way they want. Let make some fruity fans or a flower garden fan by using watercolors to draw on the fan shape.

This idea is suitable for children over four years old, and it can become a DIY gift for friends or relatives.

With the four above ideas, we hope you can find some excellent and easy ideas to make them come true with your children, stay healthy and enjoy the time at home.

Further reading: 

The Ultimate Guide to Making Your Own Baby Food

15 Incredible DIY Swings for Kids